Pool resurfacing, repair and remodeling quotes in Palm Bay and Melbourne. See what affects cost
Tiled pool steps seen under clear blue water

Palm Bay, FL ยท Pool replastering

Pool Replastering in Palm Bay, FL

Marcite, quartz and pebble finishes for concrete pools, applied by a licensed local pool contractor.

  • Marcite: Classic white plaster, usually the lowest-cost finish
  • Quartz: Diamond Brite and similar blends, tougher and more color
  • Pebble: Pebble Tec style finishes, the longest-lasting option

Get a free pool quote

A few quick questions. We'll call you back, usually the same business day.

No cost, no obligation. Or call (321) 472-2340. Privacy

Plaster to pebbleEvery pool finish

FiberglassRepair and refinish

Pool decksResurfacing and repair

Palm BayAnd Melbourne

FreeWritten quotes

Pool replastering is the most common kind of pool resurfacing in Palm Bay, because most local inground pools are concrete with a plaster-based finish. When that finish gets rough, stained or starts to flake, replastering gives the pool a smooth, watertight new surface. This page compares the main finishes, marcite, quartz and pebble, and explains how pool refinishing works from start to finish.

Gunite pool resurfacing: the basics

Gunite and shotcrete are sprayed concrete. They form the pool's shell. The shell is strong, but it is not smooth or watertight on its own, so it gets a finish on top. Over the years that finish wears down. Gunite pool resurfacing removes or roughs up the old finish and applies a new one, which renews the look, the feel and the seal.

Pool finish options compared

Marcite vs. quartz vs. pebble pool finishes
FeatureMarcite (white plaster)Quartz (e.g. Diamond Brite)Pebble (e.g. Pebble Tec)
LookClassic bright white, light blue waterSpeckled colors, many shadesNatural stone look, deep water colors
FeelSmoothSmooth to slightly texturedTextured, polished options are smoother
LifespanShortest of the threeLonger than marciteLongest of the three
Upfront costLowestMiddleHighest
Stain and etch resistanceLowestBetterBest
Best forTight budgets, classic lookMost homeowners wanting valueLong-term owners, premium look

Every finish lasts longer with balanced water. Ask your contractor for start-up and care instructions for the finish you choose.

Marcite pool resurfacing

Marcite is white plaster made from white cement and marble dust. It is the traditional finish on Florida pools and still the lowest-cost option. It looks clean and bright, but it shows stains more easily and wears faster than quartz or pebble. It is a good choice when budget matters most or you plan to sell the home soon.

Diamond Brite pool resurfacing and other quartz finishes

Quartz finishes such as Diamond Brite mix colored quartz into the plaster. The quartz makes the surface tougher and lets you choose a color, from light blues to darker shades. For many Palm Bay homeowners, quartz is the sweet spot between price and durability.

Pebble Tec pool resurfacing and pebble finishes

Pebble finishes such as Pebble Tec set small, smooth pebbles in the cement. They give the pool a natural, lagoon-like look and are the most durable of the three. They cost the most upfront but tend to need replacing least often. Some pebble lines are polished smoother for comfort on bare feet.

Pool plaster repair vs. full replastering

Small chips, a few hollow spots or a damaged step can often be fixed with pool plaster repair. Patches don't always match the old finish exactly, though, and they won't fix a surface that is worn everywhere. If the finish is rough, stained or flaking across much of the pool, full replastering is usually the better value. See pool repair for the common fixes.

How pool replastering works

  1. Inspection and quote. The contractor checks the finish, tile, fittings and shell.
  2. Careful drain-down. Planned around Florida groundwater and weather.
  3. Surface prep. The old finish is chipped out or roughed up so the new finish bonds.
  4. Repairs and fittings. Cracks, tile and fittings are handled before finishing.
  5. New finish. Marcite, quartz or pebble is applied in one continuous session.
  6. Fill and start-up. The pool is filled without stopping, then the water is balanced and the surface is brushed as directed.

Pool replastering near me: what to ask

  • Which brand and exact color will be used?
  • Will the old finish be chipped out completely or only roughed up?
  • Is waterline tile included, or priced separately?
  • Who handles start-up chemicals and brushing?
  • What does the warranty cover, and for how long?

Compare prices in the pool resurfacing cost guide, or go back to the Palm Bay pool resurfacing overview.

Frequently asked questions

What is the cheapest pool finish?
White marcite plaster is usually the lowest-cost finish. Quartz costs more, and pebble costs the most.
How long does pool plaster last?
It varies with water chemistry, use and care. Marcite has the shortest life of the three finishes, quartz lasts longer and pebble lasts the longest.
Is Diamond Brite the same as Pebble Tec?
No. Diamond Brite is a quartz finish; Pebble Tec is a pebble finish. Both are brand names, and other brands make similar products.
Can a pool be replastered without removing the old plaster?
Sometimes the old finish can be roughed up and covered. Often it is better to chip it out. The contractor will recommend the right prep for your pool.
Why does new plaster need brushing?
New plaster finishes release cement dust as they cure. Brushing during the first weeks helps the surface cure evenly.
Will my pool color look like the sample?
Water depth, sunlight and your screen enclosure all change how a finish looks. Ask to see larger samples or photos of finished pools.

Ready for your free pool quote?

Tell us about your pool in Palm Bay or Melbourne. No cost, no obligation.

Who does the work

This site connects Palm Bay and Melbourne homeowners with an independent, licensed pool contractor that works in Brevard County. Before any work starts, you will get the contractor's company name, Florida license number and a written quote, so you can check everything yourself.

  • Look up the contractor's Florida license at myfloridalicense.com before you sign.
  • Ask whether your job needs a permit from the city or county, and who pulls it.
  • Get the finish type, tile, coping and deck work spelled out in the written quote.
Call (321) 472-2340 Free quote