Pool resurfacing, repair and remodeling quotes in Palm Bay and Melbourne. See what affects cost
Outdoor swimming pool with a smooth interior finish and bright blue water

Palm Bay, FL ยท Fiberglass pools

Fiberglass Pool Resurfacing in Palm Bay, FL

Gelcoat repair and full refinishing for faded, cracked or blistered fiberglass pools.

  • Gelcoat repair: Fix blisters, cracks and spider cracks
  • Full refinish: Restore a faded or chalky fiberglass shell
  • Pool-type experts: Fiberglass needs different materials than plaster

Get a free pool quote

A few quick questions. We'll call you back, usually the same business day.

No cost, no obligation. Or call (321) 472-2340. Privacy

Plaster to pebbleEvery pool finish

FiberglassRepair and refinish

Pool decksResurfacing and repair

Palm BayAnd Melbourne

FreeWritten quotes

Fiberglass pools are smooth, low-maintenance and popular across Palm Bay. But they wear in their own ways, and they need different materials than plaster pools. If your fiberglass shell is faded, chalky, blistered or showing spider cracks, this page explains fiberglass pool repair and fiberglass pool resurfacing, and how to get a free quote from a licensed local contractor who knows fiberglass.

How fiberglass pools wear

A fiberglass pool is a one-piece shell with a smooth outer layer called gelcoat. The gelcoat gives the pool its color and slick feel. Over time, Florida sun, pool chemicals and age can wear it down.

  • Fading or chalky color: the gelcoat is breaking down on the surface.
  • Spider cracks: fine, web-like cracks in the gelcoat, often cosmetic.
  • Blisters: small bubbles where water has moved into the layers.
  • Stains: from metals in the water, leaves or chemical imbalance.
  • Structural cracks or bulges: less common, and they need prompt attention.

Fiberglass pool repair

Many fiberglass problems can be repaired without refinishing the whole pool. Contractors can grind out and fill spider cracks, repair blisters, and fix chips around steps and fittings. Color matching on older pools can be tricky, so small repairs may not blend perfectly. Ask to see examples of the contractor's fiberglass repairs.

Structural cracks, bulging walls or a shell that has moved need a careful diagnosis first. The cause may be soil movement or water pressure under the pool.

Fiberglass pool resurfacing

When the gelcoat is faded, chalky or cracked across much of the pool, full resurfacing makes sense. The pool is drained, the old surface is cleaned and prepared, repairs are made, and a new surface coat made for fiberglass is applied. The result restores the color and smooth feel.

Plaster, quartz and pebble finishes are made for concrete pools and are generally not the right choice for a fiberglass shell. Make sure your contractor uses materials designed for fiberglass.

Why draining a fiberglass pool needs care

Fiberglass shells are lighter than concrete pools. In Florida, where the ground can hold a lot of water after heavy rain, an empty fiberglass pool is especially at risk of shifting or lifting. A contractor experienced with fiberglass will plan the drain-down around the weather and keep the time the pool sits empty as short as possible. Never drain a fiberglass pool yourself.

How fiberglass resurfacing works

  1. Inspection and quote. The contractor checks the gelcoat, cracks, blisters and fittings.
  2. Planned drain-down. Timed for dry weather, with groundwater in mind.
  3. Prep and repairs. The surface is cleaned and sanded, and damage is repaired.
  4. New surface coat. A coating designed for fiberglass is applied.
  5. Cure, refill and balance. The pool is refilled once the coating has cured, then the water is balanced.

Caring for a fiberglass finish

A new or repaired fiberglass surface lasts longest with steady care. Keep the water balanced, since water that is out of balance for long stretches can stain or dull the surface. Use brushes and cleaners meant for fiberglass, not stiff wire brushes. Watch for metals in fill water, which can leave stains, and ask your contractor whether a stain-prevention product makes sense for your pool. Salt systems work with fiberglass pools when the water chemistry is kept in range.

Fiberglass pool resurfacing near me: what to ask

  • Have you resurfaced fiberglass pools before? Can I see photos?
  • Which product will you use, and is it made for fiberglass?
  • How will you protect the pool from groundwater while it is empty?
  • What does the warranty cover?

Not sure what kind of pool you have? Concrete pools feel rougher and are usually plastered; fiberglass feels slick. For concrete pools, see pool replastering. For prices, see the cost guide.

Frequently asked questions

Can a fiberglass pool be resurfaced?
Yes. Fiberglass pools can be refinished with coatings made for fiberglass. Plaster and pebble finishes are made for concrete pools.
Are spider cracks in fiberglass serious?
Usually they are cosmetic cracks in the gelcoat. They can be repaired. Cracks that leak, grow or come with bulging walls need a closer look.
What causes blisters in a fiberglass pool?
Blisters often form when water works into the layers of the shell over time. Water chemistry and age both play a role.
Is it risky to drain a fiberglass pool?
It can be, especially in wet Florida ground. Fiberglass shells are light and can shift when empty. Let an experienced contractor plan it.
How do I know if my pool is fiberglass or concrete?
Fiberglass feels slick and usually has smooth, rounded steps molded into the shell. Concrete pools with plaster feel slightly rough.
Can a faded fiberglass pool be restored without resurfacing?
Sometimes cleaning and polishing helps. If the gelcoat is badly worn, resurfacing is the lasting fix.

Ready for your free pool quote?

Tell us about your pool in Palm Bay or Melbourne. No cost, no obligation.

Who does the work

This site connects Palm Bay and Melbourne homeowners with an independent, licensed pool contractor that works in Brevard County. Before any work starts, you will get the contractor's company name, Florida license number and a written quote, so you can check everything yourself.

  • Look up the contractor's Florida license at myfloridalicense.com before you sign.
  • Ask whether your job needs a permit from the city or county, and who pulls it.
  • Get the finish type, tile, coping and deck work spelled out in the written quote.
Call (321) 472-2340 Free quote