A tired pool deck makes even a clean pool look old. Cracks, stains, peeling coatings and concrete that scorches bare feet are common in Palm Bay backyards. Pool deck resurfacing fixes the surface without tearing everything out, and pool deck repair handles the smaller problems. This page covers both, plus when a full pool deck renovation makes more sense.
Common pool deck problems
- Cracks across the concrete, or around the pool's edge.
- Peeling, flaking or faded deck coating.
- Stains from leaves, rust or pool chemicals.
- Concrete that gets too hot to walk on in summer.
- Uneven or sunken sections that cause trip hazards.
- Gaps between the deck and the coping that let water in.
Pool deck repair
Small cracks, chips and lifted edges can often be repaired. Joints between the deck and the coping can be resealed to keep water from getting underneath. If one section has sunk or lifted, it may need to be leveled or replaced. A contractor will check whether the cracks are just in the surface or show movement in the slab underneath.
Pool deck resurfacing options
Cool deck coatings
Cool deck coatings are textured layers applied over existing concrete. They are popular in Florida because they stay cooler underfoot than bare concrete and give a slip-resistant surface. They also cover stains and small cracks, and they come in several colors.
Decorative overlays
Overlays can add patterns or a stone or tile look on top of the existing slab. They are a good middle ground between a basic coating and a full replacement.
Pavers
Pavers can be installed over a sound slab or after the old deck is removed. They come in many colors, individual pavers can be replaced if one cracks, and light colors stay cooler. Pool decking resurfacing with pavers is a bigger project but changes the whole look of the backyard.
Pool deck renovation and remodel
When the slab is badly cracked, sunken or failing, a full pool deck renovation means removing the old deck and pouring a new one or installing pavers. It is also a chance to change the deck's shape or size. A pool deck remodel pairs well with pool remodeling, since new coping and the new deck can be planned together.
How pool deck resurfacing works
- Inspection and quote. The contractor checks the slab, cracks and drainage.
- Prep. The deck is cleaned and old coatings removed where needed.
- Repairs. Cracks are filled and joints are sealed.
- New surface. The coating, overlay or pavers go down.
- Cure and seal. The surface cures before foot traffic, then gets sealed if the product calls for it.
Keeping a pool deck looking new
Florida decks take a beating from sun, rain, pool chemicals and screen enclosure runoff. A few habits keep a new surface looking good longer:
- Rinse the deck after heavy pool chemical use or splashing.
- Clean off leaves and debris before they stain the surface.
- Reseal coatings and pavers on the schedule the product calls for.
- Fix small cracks and lifted edges early, before water gets underneath.
- Make sure gutters and the enclosure drain away from the deck.
Pool deck resurfacing near me: what to ask
- Is the slab sound enough for a coating, or does it need repair first?
- How hot will this surface get in full sun?
- Is it slip-resistant when wet?
- How long before we can walk on it and use the pool?
- Does the job need a permit?
If you are resurfacing the pool too, plan the deck work at the same time so the coping and deck finish match. See the cost guide for what affects deck prices, or start with our Palm Bay pool resurfacing overview.
